1月17日,2022年gydF4y2Ba
纱线:是纱线和线的总称。并具有较强的连续条,包括单纱和股纱。单纱:由短纤维加工而成,使短纤维或丝沿轴向并捻。合股纱:由两根或两根以上的单纱混合并捻而成。其强度和耐磨性均优于单纱。同时,合股纱也可以按一定的方式组合加捻得到复合加捻纱。捻线是什么?如果条的一端被拉住,另一端被旋转,纱线就可以形成,这叫做绞合。对于短纤维,加捻是使纤维条成纱的必要手段。一般有必要在扭转前将纤维压缩成纤维条,并将纤维的外层纤维挤出到内层。 Thereby, the strip is obtained in the longitudinal direction of the fibers. For long silk yarns and strands, twisted can form a tight structure that is not easily damaged by lateral force, and twisting can also form a variant wire and a fancy line. How many of the twisted and twisted direction not only affect the hand feel and appearance of the fabric, but also affect the intrinsic quality of the fabric. After the strip is twisted, the outer fibers produce a tilted helical roll back, the fiber torsional deformation, the gauze is tightly bored, and the structural form and mechanical physical properties of the fiber collective are changed. (As shown below) When there is an encirclement angle, the fiber has centripetal pressure on the yarn. The greater the encirclement angle, the greater the centripetal pressure. Due to the existence of centripetal pressure, the outer fiber is extruded to the inner layer, which increases the compactness of the yarn and the friction between the fibers, thus changing the structural form and physical and mechanical properties of the yarn, which is the essence of twisting yarn. Evaluation of yarn twist: Twist direction / twist / twist coefficient / twist shrinkage Twist direction: indicates the direction of twisting Twist direction refers to the inclined direction of the fiber in the single yarn or the single yarn in the strand after the yarn is twisted. It is divided into Z-twist and S-twist. After twisting, the twisting direction of yarn tends from the lower right corner to the upper left corner, and the inclined direction is consistent with the middle of "s", which is called s twisting or smooth twisting; The twist direction of yarn tends from the lower left corner to the upper right corner, and the tilt direction is consistent with the middle of "Z", which is called Z twist or backhand twist. Generally, Z-twist is used for single yarn and S-twist is used for ply yarn. The twist direction of the ply yarn is expressed according to the twist direction successively twisted. For example, the twist direction of single yarn with Z twist, initial twist with S twist and com...