+86 15280858852
TTF拉伸测试仪is used to provide large and stable tensile force in tensile test, most of which are used for destructive tensile force of toys. It can be used with tensile force, pressing force, insertion force, destructive force and other tests.
read more
水分测量证人r (MMT) is used to measure the overall dynamic performance of the liquid in the three-dimensional space of knitted and woven fabrics, and to measure the water absorption, penetration and penetration time of the fabric.
read more
Seam Clamp mainly used as a tool for tensile testing of toys. It is specially used as a sewing position for fabrics. Two of them are used at the same time.
read more
能量冲击试验锤according to the corresponding clauses of IEC60068-2-75, GB/T2423.55-2006, GB4706.1, GB8898 and GB7000, IEC884 and UL1244. It is mainly used to inspect housings, operating rods, handles, etc. of household and similar electrical products. The ability of housings such as knobs and indicator lights to withstand mechanical shocks.
read more
Jan 17, 2022纱线：这是纱线和螺纹的一般期限。并且具有强大的连续带材，包括单个纱线和股线。单纱：由短纤维加工，使短纤维或沿轴向的线和扭曲。PLY纱线：它由两种或更多的单纱组成，组合和扭曲。它的强度和耐磨性优于单纱线。同时，帘布层也可以以某种方式组合并扭曲以获得复合扭曲的纱线纱线。什么是扭曲？如果保持条形的一端，则另一端旋转，并且可以形成纱线，称为扭曲。对于短纤维，扭曲是使纤维条作为纱线的必要方法。在扭转之前，通常必须将纤维压在纤维条中，并且纤维的外纤维被挤出到内层中。 Thereby, the strip is obtained in the longitudinal direction of the fibers. For long silk yarns and strands, twisted can form a tight structure that is not easily damaged by lateral force, and twisting can also form a variant wire and a fancy line. How many of the twisted and twisted direction not only affect the hand feel and appearance of the fabric, but also affect the intrinsic quality of the fabric. After the strip is twisted, the outer fibers produce a tilted helical roll back, the fiber torsional deformation, the gauze is tightly bored, and the structural form and mechanical physical properties of the fiber collective are changed. (As shown below) When there is an encirclement angle, the fiber has centripetal pressure on the yarn. The greater the encirclement angle, the greater the centripetal pressure. Due to the existence of centripetal pressure, the outer fiber is extruded to the inner layer, which increases the compactness of the yarn and the friction between the fibers, thus changing the structural form and physical and mechanical properties of the yarn, which is the essence of twisting yarn. Evaluation of yarn twist: Twist direction / twist / twist coefficient / twist shrinkage Twist direction: indicates the direction of twisting Twist direction refers to the inclined direction of the fiber in the single yarn or the single yarn in the strand after the yarn is twisted. It is divided into Z-twist and S-twist. After twisting, the twisting direction of yarn tends from the lower right corner to the upper left corner, and the inclined direction is consistent with the middle of "s", which is called s twisting or smooth twisting; The twist direction of yarn tends from the lower left corner to the upper right corner, and the tilt direction is consistent with the middle of "Z", which is called Z twist or backhand twist. Generally, Z-twist is used for single yarn and S-twist is used for ply yarn. The twist direction of the ply yarn is expressed according to the twist direction successively twisted. For example, the twist direction of single yarn with Z twist, initial twist with S twist and com...
Jan 07, 2022理性、客观地评估阻力of the fabric to promote the development and production of textiles to actively promote the role. There are many test methods for Pilling Resistance of fabrics, mainly simulated during daily life and actual wear and washing process, due to continuous friction, Thus, the phenomenon of the surface of the fabric appears, and thus the test method is designed. different target markets have different tests. Methods, such as US standards, European standards, China Standards, and customer standards, usually select appropriate test methods based on export, product types or buyers. The commonly used methods include ICI Pilling Box method, Martindale Pilling method, Random Tumble method, Elastic gasket method, Circular Locus Pilling method.It should be noted that the pilling test is not only limited to the above test. and now there are many customer requirements to rating directly through the hairpin of the fabric after washing, and the customer chooses to use the post-washing sample. Various pilling test methods to assess the resistance of the fabric against the promoting pilling performance. ICI Pilling Box method The test principle is three pieces of square samples that are sized by a square specimen of sizes from the weft to the weft, each of which are sewn into a tubular shape, and the front faces are separately set on the polyurethane moisture tube. Within a cork box, the test chamber is flipped by the number of 3600 revolutions per hour, and the sample is taken out in the rating box and the fabric is compared to the fabric, and the first level is the worst. The 5th is best, when the result is between the two adjacent two levels, I evaluate half. Common test standards include ISO 12945-1, GB / T 4802.3, IWS TM 152. This method mainly simulates the fabric itself with its own uninterrupted friction, and the fans of the fabric and other pharmaceutically fangs. This test method can be applied to all types of fabrics, but the main domestic market or export to the European market is using this method to test the pilling performance. AVENO related products: AG05 ICI Pilling and Snagging Tester Martindale Pilling method The test principle is to take three pairs of circular samples from the fabric, which are loaded in the upper and lower clamping devices. Under the slight pressure, the sample itself rubs each other, and rubbed by the Lissajous, after a certain number of revolutions, Samples are compared with the original or standard samples of the rating box, and the the worst level 1, level 5 is the best, and when the results are interposed between two adjacent two levels, it can be evaluated as half level. This method is applicable to all types of fabrics, but it is more applied to woven fabrics. It mainly simulates the pilling condition after frequent friction between fabrics. AVENO related products: AG04 Martindale Abrasion and Pilling Tester Random Tumble method The experimental principle is to take ...
Dec 31, 2021Happy New Year 2022! May the New Year bring you happiness, peace, and prosperity. AVENO wishes you and your family Happy New Year! May the upcoming year bring you holy blessings and peace! AVENO hope your life will be full of surprise and joy in the new year that’s about to begin. Remember all the good memories you have made and know that your life will be so full of wonders in the coming year. May you be blessed with everything you want in life. Happy New Year 2022!
2021年12月15日GydF4y2Ba1.试验目的：测试唯一的扭曲和转弯后抵抗切口生长的能力，即耐受性。2.应用范围：主要适用于各种类型的曲折硫化橡胶鞋底，也适用于其他各种类型的Fluxless鞋底。3.测试原理：在SATRA TM60罗斯弯曲测试仪上安装鞋底条试件，使其切口直接在罗斯柔性抗性试验机的旋转轴中心上方。通过ISO 5423鞋底弯曲测试仪和转动试验，在其轴上拉到90±1度的试验片。在一定数量的测试之后，测量测试测试仪的长度。评价试验鞋底性能的质量及其切口生长速率。4.测试仪器：罗斯弯曲测试仪：罗斯弯曲测试仪用于测试橡胶制品，鞋底的垂直弯曲电阻，以及泡沫材料Suce Pu，PVC，TPR。弯曲一定时间后，然后检查衰减，损坏和开裂程度以获得样品的弯曲性。更多关于罗斯弯曲测试仪请点击：//www.40crgbanjc.com/ross-plexing-tester-af23_p88.html立即联系我们！销售部门电话：+86 15280858852电子邮件：sales@avenotester.com skype：sales@avenotester.com网页：www.40crgbanjc.comGydF4y2Ba
Nov 17, 20211. Calibration items: angle (90°), speed (60~100±5 times/min) 2. Correction equipment: angle gauge, electronic stopwatch 3. Calibration period: one year 4. Calibration steps: a) Angle correction method of Ross Flex Resistance Testing Machine: i. First adjust the machine in a horizontal state. ii. Turn the motor belt by hand or press the STOP and START keys to adjust the horizontal position of the movable end fixture, place the angle gauge on the movable fixture, and the angle gauge indication should be 0°. Continue to rotate the belt or press the STOP and START keys to move the maximum swing angle of the end fixture is 90° to observe whether it matches the value indicated by the angle gauge. b) Speed correction method of SATRA TM60 Ross Flex Tester: i. Start the POWER button on the control panel, reset the "PV" column to zero, and set the number of times in the "SV" column (the number of times that the correction speed is exceeded). ii. Press the START button to start the machine, and at the same time let the electronic stopwatch start timing. iii. When the electronic stopwatch reaches 1 minute to stop timing, press the STOP machine to stop at the same time, and observe whether the 1 minute time is consistent with the standard speed. More about ROSS Flexing Tester please click: //www.40crgbanjc.com/ross-flexing-tester-af23_p88.html Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.40crgbanjc.com
Nov 04, 2021红外染色牢度测试设备的结构：结合红外线和传统甘油打样的一般优势，采用高温机门密封胶，易于使用。在笼子里有一个热转印油绝缘功能，在下次放置杯子由于门温而不会降低。染料杯材料：由高品质的SUS316制成。色度染色机器计算机：微电脑控制（中英式液晶电脑），可编程100种技术;升温曲线，温度精度高达±0.1℃，高达20-140℃。加热和冷却速度：0.1℃〜9.9℃/ min。电加热纺织红外线染色设备：电热杯和杯子同时照射，功率，温差小，无烟灰污染，无甘油损失;和绝缘，恒温效应，可以节省巨大的甘油和电力成本。更多关于红外实验室染色机，请点击：//www.40crgbanjc.com/infrared-laboratory-dyeing-machine-ac19_p176.html立即联系我们！销售部门电话：+86 15280858852电子邮件：sales@avenotester.com skype：sales@avenotester.com网页：www.40crgbanjc.comGydF4y2Ba
online service
+86 15280858852
sales@avenotester.com
sales@avenotester.com
+86 15280858852
