+86 15280858852
Sharp Edge TesterToy Sharp Edge Test InstrumentsEN 71 Sharp Edge TesterASTM F963 Edge Sharp TesterISO 8124 Toy Edge Sharp TesterToy Safety Sharp Edge Tester
Gap Test Round used to test whether there is a potential hazard of pinching or crushing fingers or other appendages in the gaps between moving parts in toys used by children under 96 months of age.
read more
Seam Clamp mainly used as a tool for tensile testing of toys. It is specially used as a sewing position for fabrics. Two of them are used at the same time.
read more
能量冲击试验Hammer according to the corresponding clauses of IEC60068-2-75, GB/T2423.55-2006, GB4706.1, GB8898 and GB7000, IEC884 and UL1244. It is mainly used to inspect housings, operating rods, handles, etc. of household and similar electrical products. The ability of housings such as knobs and indicator lights to withstand mechanical shocks.
read more
Push-Pull Test Stand use with push-pull gauge，Used for tensile/compression, insertion/exit and break testing of toys. Through gear drive and manual operation, the adjustable test bench can move up and down to set the direction, which is simple, stable, fast and capable of batch testing.
read more
1.紧张和压力测量2。测量touch pressure of a touch screen or keyboard 3. Measuring the welding force of electronic components 4. Test of tension and pressure for insertion and pull-out of wire connections 5. Test for opening of lid for cans or noodle containers
read more
Nov 17, 20211.Calibration items: angle (90°), speed (60~100±5 times/min) 2. Correction equipment: angle gauge, electronic stopwatch 3. Calibration period: one year 4. Calibration steps: a) Angle correction method of Ross Flex Resistance Testing Machine: i. First adjust the machine in a horizontal state. ii. Turn the motor belt by hand or press the STOP and START keys to adjust the horizontal position of the movable end fixture, place the angle gauge on the movable fixture, and the angle gauge indication should be 0°. Continue to rotate the belt or press the STOP and START keys to move the maximum swing angle of the end fixture is 90° to observe whether it matches the value indicated by the angle gauge. b) Speed correction method of SATRA TM60 Ross Flex Tester: i. Start the POWER button on the control panel, reset the "PV" column to zero, and set the number of times in the "SV" column (the number of times that the correction speed is exceeded). ii. Press the START button to start the machine, and at the same time let the electronic stopwatch start timing. iii. When the electronic stopwatch reaches 1 minute to stop timing, press the STOP machine to stop at the same time, and observe whether the 1 minute time is consistent with the standard speed. More about ROSS Flexing Tester please click: //www.40crgbanjc.com/ross-flexing-tester-af23_p88.html Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.40crgbanjc.com
Nov 04, 2021Structure Of Infrared Dyeing Fastness Test Equipment： Combined with the general advantages of infrared and traditional glycerol proofer, The use of high-temperature machine door sealant, easy to use. There is a heat transfer oil insulation function in the cage, put the cup in the next time will not be lower because of the door temperature. Dye cup material: are made of high quality SUS316. Computer Of Colorfastness Dying Machine： Microcomputer control (Chinese and English LCD computer), programmable 100 kinds of technology; A temperature rise curve, temperature accuracy of up to ± 0.1 ℃, up to 20-140 ℃. Heating and cooling rate: 0.1 ℃ ~ 9.9 ℃ / min. Electric heating Of Textile Infrared Dying Equipment: Electric heating cups and cups at the same time irradiation, power, temperature difference is small, no soot pollution, no glycerin loss; and insulation, constant temperature effect, can save huge glycerol and electricity costs. More about Infrared Laboratory Dyeing Machine please click: //www.40crgbanjc.com/infrared-laboratory-dyeing-machine-ac19_p176.html Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.40crgbanjc.com
10月28日,2021Application of Fineness Tester For Fiber Fiber Content Analyzer is mainly used for measuring various fiber diameters, cross-section analysis, and content of textile ingredients. Features of Fiber Fineness Tester Obtain the longitudinal microscopic image of the fiber through the digital camera. With the intelligent assistance of the software, the operator can quickly and conveniently realize the functions of fiber longitudinal diameter test, fiber type identification, and statistical report generation. Provides an accurate scale calibration function, which fully guarantees the accuracy of the fineness test data. Provides professional automatic image analysis and fiber diameter prompt functions, making fiber diameter testing extremely easy. Provide industry standard conversion function for non-circular cross-section fibers during longitudinal testing. The fiber fineness test results and type classification data can automatically generate professional data reports or export to EXCEL tables. Suitable for fiber diameter measurement of animal fiber, chemical fiber, cotton and linen, etc., with fast measurement speed, simple operation, and reduced human error. The fineness measurement range is 2~200μm. The fiber diameter measurement meets the requirements of the national standard GB/T 10685-1989 Wool Fiber Diameter Test Method-Projection Microscope Method. The content measurement complies with the national standard GB/T 16988-1997 for the determination of the content of the mixture of special animal fiber and wool. The measurement of cotton and linen content conforms to the textile industry standard FZ/T30003-2000, the quantitative analysis method of cotton and linen blended products, and the micro-projection method. In line with the commodity inspection standard SN/T0756-1999, the quantitative analysis method and the microscope projection method for import and export hemp/cotton blended products. Provide a library of standard samples of special animal fiber and chemical fiber, which is convenient for experimenters to compare and improve the identification ability. System composition and hardware configuration of Fiber Testing Equipment (1) System software and hardware requirements: Hardware requirements: Intel dual-core 2.0 or higher processor, 512MB or more of memory, 64MB or more of display memory, 10GB or more of hard disk space, CD-ROM drive Software requirements: Chinese Windows XP or above operating system, pre-installed EXCEL2003. The system recommends the use of 17" or more color monitors, running in 1024×768 (or higher) resolution and 24-bit true color display mode. Need to adjust the computer UAC to the minimum: win+R—input MSCONFIG—tool—change UAC settings—start—adjust to the minimum. After opening the Excel option, adjust the macro security to the lowest level to prevent the system from preventing the software from performing fiber calculations and statistics. (2) Main configuration 1) System biological microscope (including CCD) 1 set...
2021年10月18日1 Before use, the heavy hammer must be installed in place, and the handwheel must be tightened and tightened. 2 When the Digital Elmendorf Tearing Tester is working, hands, heads, etc. should not be close to the handle turning area; it is strictly forbidden to make the handle touch any obstacles. 3 When the Tearing Tester has not been used for a long time, it should be oscillated several times before use, and the calibration operation should be carried out. 4 If you want to move the Fabric Tearing Testing machine, you must first place the swing device in a locked state. 5 There is no strong electromagnetic interference around. 6 The Paper Tearing Tester should be maintained regularly. More about Digital Tearing Tester please click: //www.40crgbanjc.com/digital-tearing-tester-ag11-3_p212.html Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.40crgbanjc.com
Oct 04, 20211.Install two uprights Locate the Fabric Appearance Meassure Board base and two uprights, and lock the screws on both sides of the base. 2. Install the lamp holder Locate the top frame with the lamp holder, and lock the screws on both sides. 3. Installation panel Locate the panel against the top of the Fabric Appearance Meassure Board, align the holes on both sides, and insert the screws. 4. Install the panel support rod Find two corresponding holes on the two uprights of the instrument frame, and install the sample support frame. More about Fabric Appearance Assessment System please click: //www.40crgbanjc.com/fabric-appearance-assessment-system-ag47_p261.html Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.40crgbanjc.com
Sep 07, 20211.First turn the speed knob (clockwise) to the minimum; 2. Place the object to be tested on the workbench and use a fixture to clamp it firmly; 3. Adjust the height of the upper and lower cross bars to make the distance between the clamps appropriate. 4. Adjust the "speed knob" to make the speed meet the requirements 5. Clamp the lower end of the test piece with the lower clamp, raise the lower cross bar to a proper distance and then stop the machine, and then clamp the upper part of the test piece with the upper clamp. 6. Turn on the Fabric Tensile Tester power, start the operation, adjust the experiment stroke, and stop after adjustment; 7. When everything is ready, press the up or down push-pull test to start the test. 8. When repeating the experiment, you can repeat the above operations. When you need to stop in the middle, you can press the stop switch, and you can continue after pressing the start; 9. After the test, adjust the displacement to the minimum and the speed to the minimum, and then turn off the power. More about the Universal Tensile Strength Tester please click: //www.40crgbanjc.com/single-column-universal-tensile-strength-tester-ag02-2_p156.html Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.40crgbanjc.com
online service
+86 15280858852
sales@avenotester.com
sales@avenotester.com
+86 15280858852
