安全鞋影响测试人员AF03
安全鞋影响测试人员is used to test the impact resistance of safety shoe.
+86 15280858852
+86 15280858852
Circular Rub Fastness Testeris used for evaluate the material damage and surface color transfer after dry or wet abrasion of shoe’s upper material,leather, textile, plastic, and other colored material.
model :
AF36品牌：
AVENOorigin:
中国Lead Time：
10-20天port:
Xiamen port支付：
T/T, L/Ccertificate:
CE ISO9001 ISO17025standard:
SATRA PM8, BS EN 13516 Method BAF36-Circular Rub Fastness Tester
应用Circular Rub Fastness Tester
Circular Rub Fastness Testeris used for evaluate the material damage and surface color transfer after dry or wet abrasion of shoe’s upper material,leather, textile, plastic, and other colored material.
StandardsOfCircular Rub Fastness Tester
SATRA PM8，BS EN 13516方法B。
Key SpecificationOfCircular Rub Fastness Tester
Model |
AF36Circular Rub Fastness Tester |
Sample size |
60×60 mm or Ø60mm |
Rubbing speed |
150±5 r.p.m. |
加载 |
7.1±0.2N或24.5±0.5n |
羊毛毡 |
Outer diameter 25±1mm, Inner diameter 3±0.5mm Density 190±20kg/m3 |
Aluminum plate |
Ø50mm，厚度12mm |
电源供应 |
AC220V, 50/60HZ |
方面 |
30×45×47 cm |
重量 |
45kg |
安全鞋影响测试人员is used to test the impact resistance of safety shoe.
安全鞋插入弹性测试仪旨在确定鞋垫对安全鞋弯曲的阻力。
Shoes lining seepage tester used to test the waterproof function of rubber-faced,rubber shoes and shoes lining.
抗静电电阻测试仪is used to testing the electrical resistance of the shoes to assess its anti-static characteristics.
Slip Resistance Tester is suitable for whole shoes, outsole with dry and wet method, The floor material can be made of stainless steel, carpet, ceramic tile, etc.
Shoes Heat Insulation Tester is used to determine the resistance of the shoe material to heat.
安全鞋冷隔热测试室适合对各种鞋子和靴子进行冷阻力测试。
Footwear Water Penetration & Flexing Tester is used to determine the resistance to water penetration of the whole shoe during flexing.
水分测量仪(MMT)is used to measure the overall dynamic performance of the liquid in the three-dimensional space of knitted and woven fabrics, and to measure the water absorption, penetration and penetration time of the fabric.
read more
能源冲击测试锤，根据IEC60068-2-75的相应条款，GB/T2423.55-2006，GB4706.1，GB88898和GB7000，IEC884和UL1244。它主要用于检查家庭和类似电气产品的外壳，操作杆，手柄等。旋钮和指示灯等外壳能够承受机械冲击的能力。
read more
2022年1月17日纱线：这是纱线和线程的一般术语。并具有强烈的连续条，包括单纱线和链。单纱：由短纤维处理，使沿轴向方向的短纤维或电线扭曲。PLY纱：它由两种或多个单纱制成，并扭曲。它的强度和耐磨性比单纱更好。同时，也可以以某种方式组合和扭曲层纱，以获得复合的扭曲纱。什么是扭曲？如果持有条带的一端，则旋转另一端，并且可以形成纱线，称为扭曲。对于短纤维，扭曲是使纤维带作为纱线的必要手段。通常有必要在扭曲之前将纤维凝结到纤维带中，并将纤维的外纤维挤出到内层中。 Thereby, the strip is obtained in the longitudinal direction of the fibers. For long silk yarns and strands, twisted can form a tight structure that is not easily damaged by lateral force, and twisting can also form a variant wire and a fancy line. How many of the twisted and twisted direction not only affect the hand feel and appearance of the fabric, but also affect the intrinsic quality of the fabric. After the strip is twisted, the outer fibers produce a tilted helical roll back, the fiber torsional deformation, the gauze is tightly bored, and the structural form and mechanical physical properties of the fiber collective are changed. (As shown below) When there is an encirclement angle, the fiber has centripetal pressure on the yarn. The greater the encirclement angle, the greater the centripetal pressure. Due to the existence of centripetal pressure, the outer fiber is extruded to the inner layer, which increases the compactness of the yarn and the friction between the fibers, thus changing the structural form and physical and mechanical properties of the yarn, which is the essence of twisting yarn. Evaluation of yarn twist: Twist direction / twist / twist coefficient / twist shrinkage Twist direction: indicates the direction of twisting Twist direction refers to the inclined direction of the fiber in the single yarn or the single yarn in the strand after the yarn is twisted. It is divided into Z-twist and S-twist. After twisting, the twisting direction of yarn tends from the lower right corner to the upper left corner, and the inclined direction is consistent with the middle of "s", which is called s twisting or smooth twisting; The twist direction of yarn tends from the lower left corner to the upper right corner, and the tilt direction is consistent with the middle of "Z", which is called Z twist or backhand twist. Generally, Z-twist is used for single yarn and S-twist is used for ply yarn. The twist direction of the ply yarn is expressed according to the twist direction successively twisted. For example, the twist direction of single yarn with Z twist, initial twist with S twist and com...
Jan 07, 2022Rationally and objectively evaluate the resistance of the fabric to promote the development and production of textiles to actively promote the role. There are many test methods for Pilling Resistance of fabrics, mainly simulated during daily life and actual wear and washing process, due to continuous friction, Thus, the phenomenon of the surface of the fabric appears, and thus the test method is designed. different target markets have different tests. Methods, such as US standards, European standards, China Standards, and customer standards, usually select appropriate test methods based on export, product types or buyers. The commonly used methods include ICI Pilling Box method, Martindale Pilling method, Random Tumble method, Elastic gasket method, Circular Locus Pilling method.It should be noted that the pilling test is not only limited to the above test. and now there are many customer requirements to rating directly through the hairpin of the fabric after washing, and the customer chooses to use the post-washing sample. Various pilling test methods to assess the resistance of the fabric against the promoting pilling performance. ICI Pilling Box method The test principle is three pieces of square samples that are sized by a square specimen of sizes from the weft to the weft, each of which are sewn into a tubular shape, and the front faces are separately set on the polyurethane moisture tube. Within a cork box, the test chamber is flipped by the number of 3600 revolutions per hour, and the sample is taken out in the rating box and the fabric is compared to the fabric, and the first level is the worst. The 5th is best, when the result is between the two adjacent two levels, I evaluate half. Common test standards include ISO 12945-1, GB / T 4802.3, IWS TM 152. This method mainly simulates the fabric itself with its own uninterrupted friction, and the fans of the fabric and other pharmaceutically fangs. This test method can be applied to all types of fabrics, but the main domestic market or export to the European market is using this method to test the pilling performance. AVENO related products: AG05 ICI Pilling and Snagging Tester Martindale Pilling method The test principle is to take three pairs of circular samples from the fabric, which are loaded in the upper and lower clamping devices. Under the slight pressure, the sample itself rubs each other, and rubbed by the Lissajous, after a certain number of revolutions, Samples are compared with the original or standard samples of the rating box, and the the worst level 1, level 5 is the best, and when the results are interposed between two adjacent two levels, it can be evaluated as half level. This method is applicable to all types of fabrics, but it is more applied to woven fabrics. It mainly simulates the pilling condition after frequent friction between fabrics. AVENO related products: AG04 Martindale Abrasion and Pilling Tester Random Tumble method The experimental principle is to take ...
Dec 31, 2021Happy New Year 2022! May the New Year bring you happiness, peace, and prosperity. AVENO wishes you and your family Happy New Year! May the upcoming year bring you holy blessings and peace! AVENO hope your life will be full of surprise and joy in the new year that’s about to begin. Remember all the good memories you have made and know that your life will be so full of wonders in the coming year. May you be blessed with everything you want in life. Happy New Year 2022!
2021年12月15日1. Test purpose: Test the ability of the sole to resist incision growth after continuous twists and turns, that is, tolerance resistance. 2. Scope of application: It is mainly suitable for various types of tortuous sulfurized rubber sole, and also suitable for other various types of fluxless sole. 3. Test principle: Install the sole strip test piece on the SATRA TM60 Ross Flex Tester, so that its incision falls directly above the rotary axis center of the Ross Flex Resistance Testing Machine. Through the ISO 5423 Sole Bending Tester and turning test, the test piece was pulled to 90 ± 1 degrees on its shaft. After a certain number of tests, the length of the test tester was measured. Evaluate the quality of the test sole resistance performance with its incision growth rate. 4. Test Instrument: ROSS Flexing Tester: ROSS Flexing Tester is used to test the vertical flex resistance of rubber products, sole of shoes, and Foamed material suce PU、PVC、TPR. After flexing a certain times, then check the attenuation, damage and cracking degree to get the flexing resistance of the sample. More about ROSS Flexing Tester please click: //www.40crgbanjc.com/ross-flexing-tester-af23_p88.html Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.40crgbanjc.com
2021年11月17日1.校准项目：角度（90°），速度（60〜100±5次/分钟）2。校正设备：角度计，电子秒表3.校准时间：一年4.校准步骤：A）罗斯弹性阻力测试机：i。首先以水平状态调整机器。ii。用手转动电动带，或按下停止键并启动键以调节可移动末端固定装置的水平位置，将角度量规放在可移动的固定装置上，然后角度量规指示为0°。继续旋转皮带，或按下挡块并启动键以移动末端灯具的最大摆动角度为90°，以观察它是否与角度量规指示的值匹配。B）SATRA TM60 ROSS FLEX测试仪的速度校正方法：i。启动控制面板上的电源按钮，将“ PV”列重置为零，然后在“ SV”列中设置次数（超过校正速度的次数）。ii。按开始按钮启动机器，同时让电子秒表开始时机。 iii. When the electronic stopwatch reaches 1 minute to stop timing, press the STOP machine to stop at the same time, and observe whether the 1 minute time is consistent with the standard speed. More about ROSS Flexing Tester please click: //www.40crgbanjc.com/ross-flexing-tester-af23_p88.html Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.40crgbanjc.com
2021年11月4日Structure Of Infrared Dyeing Fastness Test Equipment： Combined with the general advantages of infrared and traditional glycerol proofer, The use of high-temperature machine door sealant, easy to use. There is a heat transfer oil insulation function in the cage, put the cup in the next time will not be lower because of the door temperature. Dye cup material: are made of high quality SUS316. Computer Of Colorfastness Dying Machine： Microcomputer control (Chinese and English LCD computer), programmable 100 kinds of technology; A temperature rise curve, temperature accuracy of up to ± 0.1 ℃, up to 20-140 ℃. Heating and cooling rate: 0.1 ℃ ~ 9.9 ℃ / min. Electric heating Of Textile Infrared Dying Equipment: Electric heating cups and cups at the same time irradiation, power, temperature difference is small, no soot pollution, no glycerin loss; and insulation, constant temperature effect, can save huge glycerol and electricity costs. More about Infrared Laboratory Dyeing Machine please click: //www.40crgbanjc.com/infrared-laboratory-dyeing-machine-ac19_p176.html Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.40crgbanjc.com
在线服务
+86 15280858852
sales@avenotester.com
sales@avenotester.com
+86 15280858852
